彈性柱銷齒式聯軸器是利用若干非金屬材料制成的柱銷,置于兩半聯軸器與外環內表面之間的對合孔中,通過柱銷傳遞轉矩實現兩半聯軸器聯接,該聯軸器具有以下特點:
●(1)傳遞轉矩大,在相同轉矩時回轉直徑大多數比齒式聯軸器小,體積小,質量輕,可部分代替齒式聯軸器。
●(2)與齒式聯軸器相比,結構簡單,組成零件較少,制造較方便,不用齒輪加工機床。
●(3)維修方便,壽命較長,拆下檔板即可更換尼龍銷。
●(4)尼龍柱銷為自潤材料,不需潤滑,不僅節省潤滑油,而且凈化工作環境。
●(5)減振動能差,噪聲較大。 彈性柱銷齒式聯軸器具有一定補償兩軸相對偏移的性能,適用于中等和較大功率傳動,不適用于對減振有一定要求和噪聲需要嚴加控制的工作部位。
Elastic dowel pin coupling is the use of a number of non-metallic materials of the dowel pin, placed in two and a half coupling between inner surface and outer ring the involution of the hole, achieved by column pin transfer torque half coupling, the coupling has the following features:
(1) the transmission torque is large, and in the same torque, most of the rotating diameters are smaller than the tooth couplings, small in size and light in weight, which can be partially replaced by the dental coupling.
(2) compared with the tooth type couplings, the structure is simple, with fewer components and more convenient manufacturing.
(3) the maintenance is convenient, the life is longer, remove the plate can replace the nylon pin.
(4) nylon pin is self-run material, not lubrication, not only saves the lubricating oil, but also purifies the working environment.
(5) the vibration can be poor and noisy. Elastic dowel pin type coupling with certain compensation performance of the two axes relative offset, suitable for medium and high power drive, does not apply to have a certain request for vibration damping and noise must be kept under strict control of the work.
![](/uploadfile/201802/2018020915181618957507856.jpg)